When are rafter ties required, and how far apart can they be?
Where ceiling joists do not connect rafters to resist outward thrust, rafter ties are required, spaced no more than 4 feet on center; otherwise the ridge must be a structural ridge supported by a wall or beam (IRC R802.3.1).
In a conventionally framed roof, the rafters push outward at the walls under load. Ceiling joists that run parallel to and are connected to the rafters act as ties that resist this thrust. Where the ceiling joists are not connected to the rafters at the top wall plate, rafter ties must be provided instead.
Rafter ties are installed near the top of the wall plates and must be spaced no more than 4 feet on center.
Where neither ceiling joists nor rafter ties are provided to resist the outward thrust, the ridge must be designed as a structural ridge beam supported by a wall or girder.
Verified against
Related answers
- What is the minimum size for a roof ridge board? — IRC §R802.3
- How much attic ventilation do I need? — IRC §R806.2
- What size does an attic access opening need to be? — IRC §R807.1
- How much attic/ceiling insulation does the energy code require by climate zone? — IRC §N1102.1.1
- What is the minimum roof slope for asphalt shingles? — IRC §R905.2.2
- Where is an ice barrier (ice and water shield) required on a roof? — IRC §R905.1.2
Need this scoped to your jurisdiction?
Adopted edition and local amendments vary by city and county. Ask Donnie checks your jurisdiction and cites the exact adopted section.
Ask Donnie →General information based on the International Residential Code (a model code). This is AI assistance to verify — not legal advice. Confirm the adopted edition and any local amendments with your local building department (AHJ) and a licensed professional before you build.