← All construction calculators
Paver calculator
Pavers for a patio, walk, or driveway area — any rectangular unit size, cut waste included.
Loading calculators…
How it’s computed
Pavers = ceil(area × (1 + waste) ÷ paver face), where face = (length in × width in) ÷ 144 sqft. Defaults: 6×6 paver, 5% waste. For a rectangular area, pass length × width as the area.
The calculator applies the formula below to the numbers you enter. This is the same math Ask Donnie’s estimating engine runs — never a language model doing arithmetic.
Common questions
Herringbone or running bond?
Patterned lays cut more at the borders — raise the waste input above the 5% default, especially on narrow walks where edges dominate.
How much base do I need under them?
Use the gravel calculator with your bedding + base depth for the volume; base depth itself depends on soil and traffic — follow your paver manufacturer's guidance.
What it costs installed
Turn the quantity into a budget. National installed ranges from the same cost catalog, with by-state and by-metro figures on each guide:
- Concrete paver patio cost per square foot — typically $11.30–$12.29 per sq ft
- Concrete driveway and walkway cost per square foot — typically $7.69–$8.36 per sq ft
Need the whole estimate, not just this number?
Ask Donnie turns a description into a full itemized estimate. Pricing is calculated from your quantities and unit costs. See pricing.