How much clearance is required in front of an electrical panel?
Panels need clear working space at least 36 in deep, 30 in wide (or the equipment width), and 6½ ft high (IRC E3405.2).
The IRC requires clear working space in front of panelboards and other energized equipment likely to need servicing: at least 36 inches (914 mm) deep measured from the live parts, and at least 30 inches (762 mm) wide — or the width of the equipment, whichever is greater.
That space must be clear from the floor to a height of 6½ feet (78 inches / 1981 mm) or the top of the equipment, whichever is greater, and must allow equipment doors or hinged panels to open at least 90 degrees. Don't store anything or run foreign piping and ducts through it.
Verified against
Related answers
- How far apart do wall outlets have to be (the 6/12 foot rule)? — IRC §E3901.2
- How many outlets do I need on a kitchen counter and how far apart? — IRC §E3901.4
- Where does the outlet have to be in a bathroom? — IRC §E3901.6
- Which outlets in a house have to be GFCI protected? — IRC §E3902
- Where is AFCI (arc-fault) protection required in a house? — IRC §E3902.16
- Do I have to use tamper-resistant outlets in a house? — IRC §E4002.14
Need this scoped to your jurisdiction?
Adopted edition and local amendments vary by city and county. Ask Donnie checks your jurisdiction and cites the exact adopted section.
Ask Donnie →General information based on the International Residential Code (a model code). This is AI assistance to verify — not legal advice. Confirm the adopted edition and any local amendments with your local building department (AHJ) and a licensed professional before you build.