← Blog

Takeoff

How to estimate an interior paint job

By Ask Donnie · · 5 min read

A painting estimate is surface area, coats and coverage, plus the prep and trim work that takes most of the labor. Painters who underbid usually counted gallons right and missed the prep.

1. Measure each surface

  • Walls: room perimeter × wall height, less large openings.
  • Ceilings: length × width, kept as its own line. Ceiling paint and ceiling labor differ from walls.
  • Trim and baseboard: linear feet.
  • Doors and windows: count them, both sides of a door if both get paint.

2. Gallons from area, coats and coverage

Gallons = area × coats ÷ coverage per gallon, rounded up. Use the coverage printed on the can you will buy. Many labels say around 350 to 400 square feet per gallon on smooth, primed surfaces, and rough or porous surfaces take more. Two coats on 416 square feet of wall at 350 square feet per gallon is 832 ÷ 350 = 2.4, so 3 gallons.

3. Primer and color changes

New drywall, patched areas, stains and strong color changes need primer or an extra coat. Add primer as its own line with its own coverage.

4. Prep and protection

  • Moving and covering furniture and floors.
  • Patching, caulking and sanding.
  • Masking trim, hardware and fixtures.
  • Cleanup and touch-up.

5. Trim, doors and the rest

Price trim by the linear foot and doors by the each. Add sundries such as tape, plastic, rollers and caulk as an allowance, and labor by the surface type.

6. Let the tools count with you

The free paint calculator on donnie4i.com runs the gallons math for any area, coats and coverage you enter, and the wall area calculator gets the net wall area. If you work from a PDF or a photo of the plan, the Measure tool in Ask Donnie (on the web and in the iPhone app) does the tracing with you: set the scale by marking a dimension you already know, then trace areas, wall lengths and counts on the sheet, and cut openings out of an area. The server works out the quantities from the points you traced and prices them from catalog unit costs, so you get an itemized takeoff to review. Check one room against a hand count before you trust a scale you set.

Write the coats and the coverage you assumed next to the gallons, so the customer can see where the number came from.

Trace the rooms, get the areas

Load a floor plan into the Measure tool, set the scale, and trace the rooms. Ask Donnie turns the traced areas into an itemized takeoff you review.

Measure a plan →

Ask Donnie is AI assistance to verify — not legal advice. Confirm the adopted edition and any local amendments with your local building department (AHJ) and a licensed professional before you build.